Call now:

01904 406321

Request a Quote

Electrics
p

Information

Towbar Electrics: 7-Pin, 13-Pin and Wiring Kits

Vehicle-specific towbar electrics installation

Updated 14 September 2026

Modern cars, vans and motorhomes use increasingly sophisticated electrical and safety systems. The towing socket and wiring kit must therefore be selected for the vehicle as well as the trailer, caravan or cycle carrier.

Which Towing Socket Do I Need?

  • Single 7-pin (12N): supplies the essential road-lighting functions and is commonly used for simple trailers and some cycle carriers.
  • Twin 7-pin (12N and 12S): an older arrangement that adds auxiliary supplies for suitable caravans.
  • Single 13-pin: the modern standard for most caravans and many trailers, combining lighting, reversing-light and auxiliary connections in one weather-resistant twist-lock plug.

When correctly specified and wired on a compatible vehicle, a 13-pin system can also provide permanent and ignition-switched supplies for caravan battery charging and refrigerator circuits.

Vehicle-Specific Wiring Kits

A dedicated wiring kit is designed to communicate with the vehicle’s electronics. Depending on the make and model, correct integration can support trailer-stability functions, alter lighting behaviour, disable rear parking sensors while towing and provide trailer-status information to the vehicle.

  • Designed for the specific vehicle platform
  • Supports compatible towing-safety functions
  • Integrates with parking aids and lighting where supported
  • Allows vehicle coding where required

Universal Bypass Relays

Universal bypass relay wiring moduleA universal bypass relay separates the trailer-lighting load from parts of the vehicle’s lighting circuit. It can be suitable for some older vehicles, but it does not provide the same level of electronic integration as a vehicle-specific kit and is not normally our recommended option for a modern vehicle.

  • Advantages: lower equipment cost and broad fitment options on suitable older vehicles
  • Limitations: vehicle towing functions may not be activated, parking aids may remain active and suitability must be checked carefully

What We Check Before Quoting

We confirm the registration, vehicle make and model, model year, existing parking aids and the trailer or accessory you intend to use. We then specify the socket, wiring kit and coding requirement and provide a fixed supplied-and-fitted price.

Read our wiring-kit guide, view our towing electrical services or request a fixed-price quote.

Call Jacques York on 01904 406321.

Message Jacques York